National Steelcrafters Inc. made the following models:Craft Stove CB4426, CB26, Cat 44, Cat441; *Craft Stove CB4830, CB300; Chateau NC24; Craft CB4830 Insert They are no longer to be found, but we have found some of the parts that go on these stoves.
![]() |
Craft hearth mount blower assembly. You must have the hearth mount box to put this blower in, as they are no longer available.
part no 1C265 $164.95
|
![]() |
If your blower is not too rusty you can just clean it and replace the motor only.
part no 1M265 $120.95
|
![]() |
Hinge pin for Craft stove
part no. 2HP38 $7.95 ea
|
![]() |
Spring handle for Craft door 1/2 inch inside diameter.
part no. 2SH12 $10.95
|
![]() |
Transition duct 8x17 1/2 x 3 1/2 for large craft stove
part no. 9S1712 $153.95
|
![]() |
Transition duct for regular and small craft stove
part no .9x14x3 1/2 $130.95
|
![]() |
Craft stove fire dogs most stoves take the 14 1/4 size but 9 and 16 are available for the same price.
part no. 9FD4 $40.95
|
![]() |
Variable speed switch for blower motor. For whisper quiet operation this is a must. Comes with knob, not shown.
part no. 4RWO $27.95
|
![]() |
Flush mount thermostat. This 120 degree thermostat will mount anywhere on the stove that gets hot. It replaces the recess thermostat or a similar flush mounted thermostat for craft or any brand stove. Keeps stove on unil it cools to 110 degrees. This keeps the blower from running in a cold stove and putting the fire out.
part no. 4T120F $19.95
|
![]() |
Two terminal switch. This is used to turn the stove on manually to test blower and set speed on variable speed switch. It is sometimes used alone with out thermostat to turn blower off and on. We think it is best used to complete or break the circuit to and from the thermostat. Call if you need instructions.
part no 4TS2 $14.95
|
![]()
| HOME | WOOD STOVES | STOVE PARTS | PREFAB CHIMNEY |
| CHIMNEY LINERS | DIRECT CONNECT KITS | GAS LOGS | GAS HEATERS |
| GRILLS | SPAS | BILLIARDS | SWIMMING POOLS |
| WICKS | CHIMNEY CAPS | SPECIALS | SHIPPING/CONTACT |